How to Configure Your D-Link Extender 1520 for Maximum Coverage
- dllnksmartwifi
- Nov 28, 2024
- 1 min read
A little Wi-Fi range extender called the DLink extender 1520 setup is made to get rid of dead spots in your house or place of business.
Plug the gadget into a power outlet close to your router to get it set up then watch for the power LED to stabilise.
The extender may be configured using a web-based setup or the WPS technique. Press the router's WPS button first followed after two minutes by the extender's WPS button.
The extender will expand the Wi-Fi network and the devices will pair automatically.
Use a computer or mobile device to connect to the extender's default network, often "D-Link-1520" for manual configuration.
Go to http://dlinkap.local in a browser.
Enter the default login information from the handbook.
To choose your router's network enter your Wi-Fi password and finish the configuration following the procedure.
After that, relocate the DAP-1520 closer to the weak signal region but still inside the router's range.
To determine the best location use the device's signal indication.
This extender is perfect for dual-band routers because it covers both the 2.4GHz and 5GHz frequencies.
Connect devices to the newly expanded network to test your connection.
To get more details about it visit our website.
Comments